Ahci driver install windows xp

 · The Installation works fine with an normal windows PE and then i write the MBR with the mbrfix tool. After the restart, the pc boots again and again and he wont boot from the HDD. Has anyone of you integrated an SATA driver or an AHCI driver in an Windows XP Embedded, if yes what must i do to get an running system.  · Installs the Intel® Rapid Storage Technology (AHCI) driver version for Intel® NUC. Which file to choose Download the driver (STOR_Win7_XP_exe) and one of the following F6 Driver Diskettes (depending on your operating system): f6flpy-x86_zip- for bit versions of the operating system.  · HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msachi. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor (if on Intel based Chipsets) and in there should be an entry called Start.

Although SATA, AHCI and RAID enabled storage controllers have been around for several years, the Windows XP install CD never gained the ability to install directly onto this hardware, and you need a floppy disk with the necessary drivers for XP to be able to recognize your hard drives during setup. With a Intel Chip Set. 1) Download your upto date Chip Set Drivers. 2) Set IDE mode in BIOS. 3) Install Windows XP. 4) Install your upto date Chip Set Drivers. 5) Shut the PC down. 6) Set AHCI mode in BIOS. 7) Reboot the PC your PC will now boot in AHCI mode. NOTE: You may done to reboot two or three time. You must either install XP in AHCI mode, and install the f6flpy-x64_zip driver during the OS installation, or perform a registry change that will allow you to change to AHCI mode. Google on "changing to AHCI mode" for complete instructions.

I think I'm stuck at a certain point tho, I'm able to see a list of drivers for AHCI and RAID, but don't know which driver to install as. Sau khi cài đặt Windows XP, cần cài thêm driver cho Intel SATA AHCI Controller và cấu Đối với Laptop IBM/Lenovo[/b] 1- Chạy vào BIOS Setup Utility menu. During Windows XP installation procedure, press [F6] when you see this message: "Press F6 if you need to install a 3rd party SCSI or RAID driver".